Cable Wire Stripping Tool

This as been tested in two different printers my MK3 and a friend Bambu Lab P1S.

The extra material you will need is a “box cutter blade” with 9mm, two wood screws with 10mm and super-glue.
 

I will add two extra files, for people that have multi material printing option.

The way to use this tool:

Place the cable we want to strip, adjust the height of the blade and push the slider on the arm until we feel a small pressure, (the pressure exerted is a matter of adaptation) this pressure is what will cut the insulation of the wire, if you go too far you end up cutting the cable.
Then we turn the tool around the wire, after rotation we pull the tool in the opposite direction of the cable.
 

On download section you will find a manual to help you understand on how to assembly this tool.

A small 3d model video to show you the assembly.

Real assembly:

Showing the tool in use:

I hope you enjoy this tool.