Spice Shelf - No Assembly Required

A simple spice shelf to utilize the vertical space in cupboards. Less convenient than pullout spice racks, but it doesn't require any hardware parts or assembly.

It has enough depth for two thin and tall spice bottles, or one wide spice bottle. 

Print settings:

• Layer height: 0.28mm
• Support: no support required when printed in the given orientation.
• Wall loops: 2
• Top and bottom shell layers: 4 and 3
• Seam position: back, to avoid seams appearing on the bottom surface when in use
• Sparse infill: 15% Gyroid, can add more infill to diagonal braces for more strength.
• Material: PLA recommended for bed-slinger printers because it's more stiff and minimizes Z-axis wobbles when printing the diagonal braces. PETG should be fine on CoreXY machines.