Combo Shredder A-Tech

Filament shredder and pelletizer for your poop from MMU/AMS systems, failed print thats cut to peases so it can fit in the shredder.

All tested and works quite good and did it way easyer for me wen i needed to make some shreddet filament for my ArtMe3D filament maker!

The model i mad was the drawer/bucket system so you don't have to have a bottle og something else. everyting is made to make it easyer to do the job.

HARDWARE:

There is some changes to the models named A-tech in front of the part name.

Needed hardware for A-TECH model (Drawer system and A-TECH parts:

      1x Bearing for better stifness on shredder. https:https://www.amazon.co.uk/Groove-Bearing-Double-Shielded-Bearings/dp/B08DHV24MQ/?th=1

      2x Plexiglass or acrylic glass cut to fit the drawer 

      5x M3 Heat Insert (OD5 L4)

      1x Ruler thats 19x1mm (Hight and width) A-TECH Shredder Version 1 https://www.amazon.co.uk/Utoolmart-Straight-Stainless-Measuring-Hanging/dp/B08JGMBF65/ref=sr_1_33?crid=2O6BTKYA4CC8T&dib=eyJ2IjoiMSJ9.-Lu4JrpuTEwgjjcbLCnzNHCWi06s-

      1x Ruler thats 18x1mm (Hight and width) A-TECH Shredder version 2

Rest of information for the Shredder and pelletizer linked TeachingTech and BuzzKillBillZ 

I made both models to a bucket/drawer so it is easy to make the wast material from pooping, failed prints, and some waste filament. 

I did some upgrades to the models so they are easyer to work with.