Lift Off Hinges for 2020 extrusion

A quick hinge I made for 2020 extrusion.

For each hinge you need:

1 - 40mm M3 socket head cap screw

1 - M3 nut

2 - M3 washers

4 - 12mm M3 socket head cap screws

4 - M3 T-nuts

Press the nut into the hexagonal opening in the smaller piece, then thread the 40mm screw through the same piece. Place the 2 washers  on the 40mm screw, then place the larger printed part on the screw. Use the 12mm and the t-nuts to attach to the 2020 extrusion.