Sim Ignition Engine Starter

Sim Ignition Starter for games

works on PC as joystick.

Working prototype adjustments may be needed!!!

You need

• Printed parts (min. 5 perimeters and 30 gyroid infill)
• Position Ignition ON /OFF /Start https://www.aliexpress.com/item/1005006066936417.html?spm=a2g0o.order_list.order_list_main.16.753e1802gZypZG
• Arduino Pro micro usb C            https://www.aliexpress.com/item/1005006160570969.html?spm=a2g0o.order_list.order_list_main.65.a4b51802kbaHZO
• USB C cable (thin plug!)
• Sim Hub for uploading sketch to board (Arduino IDE)
• Soldering iron, wires

1. Print parts
2. upload sketch to board
3. atatch wires to ignition
4. put it in body and screw nut
5. Isolate top of ignition 
6. solder board pin 2 to GND , pins 1 and 3 to buttons pins
7. put in usb C cable trought the hole and plug the board
8. put cover and sleeves on keys
9. enjoy