These designs take a lot of time and experimentation to get right, but I still keep it free to download. If you enjoy the model and want to contribute to my next bag of coffee, it would be appreciated :)
Same basic hopper internally as the EK version, just a different overall look! The base is also slightly tweaked to look a bit more fitting with the Sculptor.
If you already printed the previous design in parts, you can just print the core of this one and swap them :)
It takes upto 40g of beans, and uses the two screws from the original hopper to be fixed onto the top of the grinder.
I've included a couple of files, based on your preference on how you want to print it.
1. hopper full - this is the whole assembly, without the lid. Needs to be printed with supports.
2. hopper lid - the lid, if you want it. I like the look with it, its just a bit more "complete"
3+4. hopper core + hopper base - use these instead of hopper full if you want to print the two in different colours or without supports. You may not need to glue them together because they should fit tight and stay together sufficiently with friction, but it depends on your printer's capability and tolerances. Pay attention that the orientation of the core and base are correct when putting them together. I've included a picture of this
All parts were printed with a standard 0.2mm profile
The author marked this model as their own original creation.