Rode PSA1 Mic Boom Cable Clip

This is a cable clip for the Rode PSA1 Microphone boom (https://www.amazon.com/gp/product/B001D7UYBO/).

I wanted something a little cleaner than the velcro straps that came with the boom, so I whipped this up quickly in Fusion 360. Friction fit, and the clearance between the clip and boom is driven by a user parameter, so you can grab the fusion file and adjust if you prefer a tighter or looser fit.

Snaps on in multiple orientations, depending on how you want to run the cable, or use multiple in different orientations if you have more than one cable to run (for example for mics that support both USB and XLR).

I printed in PLA at 0.2mm layer height with 2 perimeters and 15% infill. This is not going to be subject to much if any stress unless you're frequently taking it off and putting it back on, so printing light and fast is probably fine.