This is a simple snowman magnet I designed for my mailbox.
It features three cavities for 10x2mm neodymium magnets. The actual cavity dimensions are 10.2x2.8mm (see picture for details).
I printed it using a 0.2mm layer height with Polyterra PLA in black, white, and orange, in that order.
You’ll need to pause the print at 3.4mm (Layer 17) to insert the magnets. Additionally, color changes are required at 4.2mm (Layer 21) and 5.2mm (Layer 26).
(Note: Layer numbers are based on a 0.2mm layer height.)
The author marked this model as their own original creation.