Hi,
here's a stand for an Airsoft replica from Double Eagle, My model is M923G in this case.
Stand uses the standard hi-cap mag with an adapter.
The idea was to make it simple and flat so can be easily transported to the site.
Simple print, mine is 0.3 layer with ‘base plate only’ support only required for the mag adapter.
The mag is held by 3 neodymium magnets (9.6mm x 3mm disc) and a hatch, but fitting is tight enough to hold without magnets by the friction only. Center of mass of your replica will keep it stable in place.
Adapter mag is the same for both bases.
Thanks.
The author marked this model as their own original creation.