Hueforge Gandalf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 121.96x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
PLA Black Transmission Distance: 0.6
PLA Grey Transmission Distance: 8
PLA Silver Transmission Distance: 3.2
PLA White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #14 (1.2mm) swap to Silver
At layer #21 (1.76mm) swap to White for the rest.