Elegant Desktop Print Bed Organizer/Stand

It just so happens that as you start printing with more materials, you end up with more print beds. Alas, if only there was a way to reclaim your workspace. Better yet, reclaim it in an elegant way, turning your print beds into an attraction instead of an obstacle.

Well, you're looking at the answer. A simple, flowing, elegant organizer for your extra print beds. It's simple from its looks to its printability. Holds two beds. Prints with no supports. No assembly. The stand has been oriented for you. Simply download, slice, and print.

Well… almost.

Here's what you really need know.

IMPORTANT! Please read:

• The stand is already in its ideal print orientation (on one of the flat ends). If you're worried about bed adhesion, you can add a brim.
• The center piece in between the print bed slots can wiggle with the nozzle towards the end of the print. To help with this, four small tabs have been added in the model. Slowing the print down can also help.
  • If you think your printer can manage, or don't want to remove the tabs after printing, just delete them in the slicer. I printed the stand without the tabs, and it was perfectly fine. I did slow down the print.
• Depending on your print bed thickness, the slots might feel too loose or tight. Or maybe you have three extra beds, not two. I've included a .step file so you can customize the stand for your personalized use.