Qidi Plus 4 Riser with recirculating Exhaust and Lid Prop Attachment

Made this for personal use, but figured I'd share. Provided step files so you can adjust it if you want.

The recirculating exhaust port was originally found I think on Thingiverse, but the download was messed up so I fixed it and made it two parts instead of three.

Added a new version that keeps access to the handles.

Adds a prop to the front of the riser to hold the lid up, it's meant to be adhered to the glass top and stays attached to the glass, doublesided tape or glue. OR the tab can be filed off or minused from the print. 

Step files are provided, Since the original is in 6 parts this is as well. if you only want the lid prop you can print the front two pieces only and use HandToolBrad's original parts. or if you want the exhaust part only, you can print the rear two parts only. Also, you can just leave the prop inserted in the riser frame and never use it.