Swivel-Mounted camera arm & mount collection for Prusa printers

An elegant swivel-mount for the Prusa Mk4s and XL Printers; allowing for the angle to be customized on two axes.

The mk4 mount fits into the 3030 rail, and is compatible with the Mk3 series and most likely any bed slinger with a 3030 rail.

The XL version has pre-cut holes for pausing the print to insert 10x20x2mm magnets; which are required to adhere to the arm.  (I use two stacked 10x20x1mm magnets, which work as well)

There are pre-made camera mounts for:

• Logitech c920
• Logitech Brio
• Arducam B025
• Any camera with a standard 1/4-20 UNC tripod mount
• Any camera with a flat base with double-sided tape or glue

The “glue-mount.stl” file can be easily used as a model to generate other remixes, which are welcome :)

Basically V2 of my previous model.
Better fitting swivel mount; slight changes to geometry of arm; addition of additional camera fittings.