Metabo HPT Charger Wall Mount (HSW Compatible)

I have wanted to organize my chargers for a while now. Having invested time into printing the parts for the HSW system already it was also important that the mounts were compatible. I was able to find STLs for other brands, but there is virtually nothing out there for this specific charger, which seems like a huge oversight. 

To rectify this, I went to work designing, printing, and testing until I came up with a product that is rigid enough that it won't break while inserting, wide enough that it can comfortably attach HSW inserts, versatile enough to mount directly to your wall if you don't use the HSW system, and aesthetically pleasing enough so that it stands apart from other designs.

The most important piece of advice I will give for printing is to print flat and use Normal infill to support the arched top.

Print Info:

Layer Height: 0.25

Walls: 3

Top/Bottom Layers: 2-3

Supports: Yes, use Normal to support the top of the wall mount

Other than that you should be good to go!