Cherry MX Keycap

I designed keycaps for Cherry MX switches. Hope it helps.

There are more versions. One is with a flat place for a sticker, the other ones top is more ergonomic and one has nicer edges.

Print settings:
Layer height: 0.1mm
Printing speed: 20 mm/s
Printing speed initial layer: 5 mm/s

Be careful with orientation - before putting on the switch, check out the cross, two opposite sides are thinner, place them to the narrower side of the switch.

To print the stickers I used Cannon SELPHY CP1300, paper KC-18IS

If you need more variants or some adjustments, just let me know. I can easily adjust cross hole size, individual edge angles, length, etc.

I used Ender V2. Please if you use resin, let me know how the print looks.

Category: Computer