Wide Sunlu S2 Stand

Stelzer's Sunlu S2 Filamentdryer bigbase has improved stability one direction of the spool dryer, but is unstable in the other direction. It will tip over when opening the lid due to the narrower footprint of the new stand vs the original. 

My design remix increases the footprint wider than the original dryer feet and improves stability when opening the lid to change spools. The shape is optimized to better support the dryer case geometry as well as minimize print time.

Printing

Printed in FlashForge Galaxy Black PLA at 

• 0.3mm layer
• 4 perimeters
• 10% gyroid infill
• support required (see 3mf for reference)

Thanks and let me know if you have any questions.

• Removed pin & socket features
• Deleted support material bodies
• Joined two halves
• Extended legs beyond original feet
• Optimized profile sweep cut into base to fit dryer better