Prusa light bar with IKEA Norrfly

A light bar holder that uses IKEA Norrfly LED light strip . The good thing is that Norrfly is 24v and can be connected directly to the printers own power, (if you now what you are doing). I strongly recommend that persons that don't have the knowledge of electricity not to try this. I'm not concerned about the person, but more of the risk to damage the printer in anyway. 

Depending on how long the aluminium U-shape profile are you can choose to have lights in the front or in the back, or batter  on both sides. I have used 50cm that extanded for both front and back. There is a photo for the one that i used.

All parts slides on the aluminum U-profile.

The Norrfly LED light bar is fastened with cable-tie(zip-tie). 

What you will need is 4 zip-ties, 4pcs M3 20mm screw to connect to the frame and 4pcs M3 nuts. The screws and nut can probably be find in the bag of spare screws and nuts.

U-profile explination:
A: 20 mm
B: 8 mm
C: 1 mm
D: 18 mm