Andromeda's edge deluxe remix

@Hextra_355848 made a great deluxe all in insert for andromedas edge. 
In order to save filament I wanted to see if I could avoid printing the bottom section of his insert and use the storage that comes in the box for the raiders and buildings. 
These now sit on top of the box, with everything else in his lay out the same. I also did not print the coaster tray, and instead have the 2 small card trays uploaded for the tactic cards sitting there. They end up on the side of the buildings tray. 
 

I also added a lid to the resource tray and resized the resource trays to account for the difference. 

I printed everything at 10% infill (except the resource tray and lid), and add a height range modifier with a honeycomb pattern to remove the top and bottom layers at the bottom of the trays. The total filament to print this was brought down to 1070g. 

This also allowed for more space on top or on top of the player boards to store the overlays found here: https://www.printables.com/model/1028033-overlays-for-andromedas-edge

Update: You can use the player trays that come with the game by laying 4 flat above the game board, the tactics cards next to them and then placing 1 on its side. It will sit next to the buildings tray without any lid lift. 

Modified the resource tray to allow for a lid and used a different card tray for tactic cards. You will need to print 2 of each.