W25 spindle soft jaw chuck

This is a fully printable soft jaw chuck you can machine to fit delicate work on the lathe
0
3
0
75
updated December 3, 2024

Description

PDF

I made this to hold delicate parts on the lathe. I print everything at 100% and then turn the inside to the correct size. the ring on the outside compresses the inner portion to hold the parts. 

I used PLA although I would suggest something else that machines better such as ASA.

It would also be good to make the outer ring from a low friction materials such as IGUS 150i although that does get a bit expensive 

Tags



Model origin

The author marked this model as their own original creation.

License