Starlink WiFi Router Inverted Wall Mount

Designed for the Wi-Fi router for the 2nd Gen Starlink kit. 

Printed in two parts so no support needed.

The tho parts can be glued. Or if not enough clearance to install you can use 2mm pins as shown in picture., 

The model in the photo's is printed in PLA.

Recommended print settings for a sturdy mount:

• Layer height: 0.2 mm
• Wall loops: 4
• Infill type and density: Rectilinear 50%
• Support: No 

Same mount but inverted. So router hangs upside down.