Lowers the probe on the MGN12 x-carriage to suit the Rapido Plus 2 UHF length.
The lower clamping nut and bolt have had to be relocated and you will need a shorter self tapping screw on one of the endstop switches. Apart from that, this allows you to get positive and negative from the Rapido nozzle tip to be able to set 2-3mm z-offset correctly.
No step file as I did this in Microsoft 3D because I am useless at proper CAD tools. I must learn! :D
The author remixed this model.
Lowered the probe area and screw slots and extended to accommodate the required lower position. Moved the lower nut and bolt hole upwards for clearance.