Note for non-Russian users:
PU-4 is a launcher for special pyrotechnic cartridges that are used to send emergency and information signals. In the Russian Federation, PU-4 is not a weapon, does not require a license. If PU-4 is illegal in your country, do not use my model.
Printing recommendations:
Layer thickness: 0.1mm
Layer width: 0.6mm
Material: Nylon (PA-12) - recommended, ABS, ABS-CF, PETG, PLA - not recommended, SBS - so-so.
Reinforced design, the dimensions of this threaded magazine are equivalent to the dimensions of the original flange magazine PU-4.
UPD! Based on the trial results, I made changes to the model. Download the Revision 2 file.
Рекомендации по печати:
Толщина слоя: 0,1 мм
Ширина слоя: 0,6 мм
Материал: Nylon (PA-12) - рекомендуется, ABS, ABS-CF, PETG, PLA - не рекомендуется, SBS - посредственно.
Усиленная конструкция, размеры этой резьбовой обоймы эквивалентны размерам обоймы ПУ-4 под закраину для фланцевых БАМ.
Обновление! По результатам испытаний я внес изменения в модель. Скачайте файл Ревизии 2.
The author marked this model as their own original creation.