Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 122x170mm in size
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Grey
PLA+ Sunlu White
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Grey
At layer #17 (1.44mm) swap to White for the rest.
Here you can find the other circuits I made: https://www.printables.com/@keko_2402703/collections/2118034
The author marked this model as their own original creation.