Lamp shade

Simple design lampshade.

I have assembled these using m3 bolts and zipties ;-p

Printed parts

To complete one of these you will need to print:

• 1 Bottomring choose flat or offset
• 2 Stacking rings one for the middle and one for the top
• 8 Mesh rings 

Assembly

To be able to assemble i have drilled holes in the mesh rings.

• 4 rings with 4 holes at 0, 90, 180, 270 deg.
• 4 rings with 2 holes at 0 and 180 deg

The stackrings i have also drilled for the zipties (position will make itself clear)

The mesh rings i have first mounted in sets of two rings outer ring with 4 holes inner ring with 2.

when this step is done combine them together so you will have two balls containing 4 mesh rings each.

At last stack everything together and try to connect the 3 parts be creative ;-p