Narrow blade holder for HORL sharpener

Support lames étroites pour affuteur HORL
7h 4m
5× print file
0.15 mm
0.40 mm
Flex
PLA
58.00 g
1
7
0
78
updated January 8, 2025

Description

PDF

EN ( FR ) en dessous

The Horl holder on the “cruise 2” model does not allow small blades to be sharpened.

I therefore propose this model for sharpening both narrow and wide blades.

4 modifications compared to the original holder:

1- More powerful attachment

2- Wider support (70 mm instead of 57 mm)

3- Supports both wide and narrow blades

4- Notching on the wedge for better blade retention

 

Provide four 8x15x5 magnets

https://www.123-magnet.com/cat-aimant-n-odyme-303.htm 

Assembly :

Mark the magnets as shown in the photo and glue them in place, respecting the marking (you'll see, it's fun to try to impose your will on a magnet). Beware of the risk of biting.

 

If you can't print “HSPC-ProtectionPetite X2 and HSPC-Protection Grande” in FLEX, stick on a strip of fabric adhesive.

The stud locations on the wedge are tighter than on the body, so they stay on the wedge. If necessary, glue them into the wedge.

Voilà
Translated with DeepL.com (free version)

 

FR

Le support Horl du modèle “cruise 2” ne permet pas l'affutage des petites lames.

Je vous propose donc ce modèle permettant l'affutage des lames étroites et larges.

4 modifications par rapport au support d'origine :

1— Fixation nettement plus puissante 

2— Support plus large (70 mm au lieu de 57 mm) 

3— supporte les lames larges et étroites 

4— Crantage sur la cale pour un meilleur maintien des lames

 

Prévoir quatre aimants de 8x15x5

 https://www.123-magnet.com/cat-aimant-n-odyme-303.htm 

Assemblage :

Marquer les aimants comme sur la photo et les coller en respectant ce marquage (vous allez voir c'est amusant de vouloir imposer sa volonté à un aimant) attention risque de morsure.

Si vous ne pouvez pas imprimer "HSPC-ProtectionPetite X2 et HSPC-Protection Grande' en FLEX collez une bande adhésif tissu.

Les emplacements des goujons sur la cale sont plus serrés que sur le corps afin de rester sur la cale, si besoin, collez-les dans la cale.

Voilà

 

 

 

Tags



Model origin

The author marked this model as their own original creation.

License