Losi NASCAR ESC Switch Mount

The stock power switch location for the Losi NASCAR is on the ESC/Receiver, which is very difficult to reach with the body on.  The switch also tends to come loose, because it isn't held securely in place. This 3D-printed bracket lets you move it to the side bumper area, where it is much easier to reach with the body still on. It also is just as easily accessible from the top with the body off. And above all, it is very securely held.

The only other thing needed is an M2.5 X 10mm/12mm button head screw, to attach the bracket and hold the side bumper using the existing stock screw location. The switch simply slides into place, and the features on the bottom of the bracket ‘grab’ the side bumper features to keep it secure.

I printed it in Hatchbox black PETG upside-down on the build plate, with supports as shown (I was having some cooling fan issues and had to rotate the print on the plate):

Enjoy!