Followed the tip of printing them on the side and they came out perfect. Really comfortable and great for use with socks. The adjustability is also nice. Definitely a huge upgrade over the default pedal faces!
UPDATE: Also printed the spacers and they fit and work really well. (edited)
Педалки просто класс спасибо!!!!
Easy to print. Feels great under my feets. Much better than stock metal plates. (edited)
ohhh flashy. What color/brand/type of filament is that? It would look nice on the red Playseat Trophy or Playseat Challenge.
@maverickagm
Red Sunlu PLA+,
Yes. They turned out great :)
Just printed them looks and works great!
Printed the pedals with DasFilament PLA.
They came out very nice and increased my enjoyment of the SRP Pedals by a lot. I was using the stronger springs which resulted in issues using the pedals without wearing shoes. With the pedals attached I have no issues at all driving without shoes as the grip is much better then with the out-of-the-box metal plates.
Thank you for the nice model!
Thanks but I'm guessing you designed these for inserts. To attach the pedals to the spacers using nuts you need longer bolts than 12mm. If the hex recess went down further and didn't have the round step at the bottom of the hole then maybe 12mm would work. 15mm would be ok in guessing now after trying the 12mm ones i just bought. Now I have to make another trip to the hardware store.
Ah, that's right.
Original m4x8mm countersunk screws for heat set inserts, but m4x15mm countersunk screws when using hex huts. I've updated the description
Will it fit with CRP2?
@MrBabadook_3533215 I tried and no, hopefully someone will remix the print.
why didn't you make it to where it's all together with 2 screws holding to the existing hardware
I used the stock screws to mount the spacers to the posts and just used strong double sided tape to attach the pedals to the spacers. Feels very solid. (edited)
Not perfect but still happy with it. using a TPU 95A-HF from Bambu Labs in a 0.16 mm with a 50% infill / Rectilinear pattern no supports and outer brim only. the Front and Back in lower portions print out are not smooth though the TPU has been dried for 18 hours. One comment from the remix version probably under extrusion. My first time printing in TPU filaments
