Minitrix N scale track connector isolated

I needed some track isolators for my N scale layout and while buying some was about 2€ the shipping costs were about 7€.

So I fired oneshape and created some. 

They are maybe a bit bigger than needed, but better be safe than sorry.

I tested them and seem to work just fine.

I designed them for the following print settings:

• 0.4mm nozzle
• 0.25mm first layer
• 0.1mm print layer
• 0.5mm line width for the first line
• 0.4mm line width for the rest of the lines
• no need for supports

In case you want to update just search in onshape for ‘spur N isolierverbinder’

Have fun with your trains!