Caverna Dwarves with Adventure Tracker

I liked both the adventure tracker and the miniatures, so I smashed them together. You can track it either way you want.

This includes the whole set: 5 worker miniatures for each player + the 6th worker miniature

There aren't much special settings for printing. I've used 4 perimeter and 15% infill. 50% infill for the base. Obviously support needs to be added for the miniatures bottom. I've used just a little support on “Worker 1” for the shield, although it's probably not needed. All other workers printed without additional supports. I've used 0.15mm layer height, I wanted more details on the miniatures. I don't think there will be much difference if you use 0.2mm

I've included .3mf files. A color change gcode has been added when it switches from the base to the miniature. Similarity in the wheel, a color change has been added for the numbers.

NOTE: The two parts of the base aren't super tight, there is some tolerance there. Some fit great, some are a little loose. I super glued them all. Also the “clicking” mechanism on the adventure track doesn't work that great, at least in my prints, but it doesn't really matter

Smashed them together. Put the miniatures on top of the adventure tracker.

All credits to the original authors. I've just smashed these together in the slicer.