Computer Power Switch Housing

Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!

This is a custom power switch housing I made for a Mining Rig. I printed the housing and the buttons on a texture powder coated sheet. The backplate was printed on the smooth sheet for the best adhesion. The buttons can be set up as a MMU2s print, first import the buttons then right click and add part, select the Green, and then the Red.

Here is the link to the power switch I used:

https://www.amazon.com/gp/product/B074XDTVN1/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Two screws hold the backplate to the housing, and there are two mounting holes to mount the housing to a frame. 

Share a picture if you make one!