PAR16 Light Fitting for GU10 LED Bulb

1/4 scale replica of the ubiquitous PAR64 theatre lighting fixture. I've included cans for both a short and long version to suit your taste. For best results on the long can, line the inside surface of the tube with some aluminium foil.

UPDATE 14/07/17
Added ventilated versions of both cans to aid with heat dissipation

The print requires a couple of standard additional parts available from pretty much any hardware store:
1x GU10 ceramic base
4x 10mm M3 bolts and nuts
2x 3mm washers

The M3 bolts that secure the mount to the base also lock the tube to the base. Be sure to align the holes correctly!

Post-Printing

Embed the 4 M3 nuts in the base, then thread the wires from the GU10 base through the other holes in the base and secure with 2 of the 10mm M3 bolts.

Fit the GU10 bulb, and slide the can of your choice over, making sure to align the holes correctly. Place the 3mm washers on the other two 10mm M3 bolts and pass them through the holes in the mount and screw them into the captive nuts on the sides of the base.

Enjoy your new light fixture :-)