Wago Box

Please add a like if this works for you!!  Trying to earn a roll of filament!! 
 

I needed a small box that held the 221 wagos firmly in place.  The models I have uploaded do not include holes in the side for wires since yours may be different.  You can add your own inside your slicer, and its called a negative volume.  I have included the Fusion and STEP files for you to modify as well.  If you need a different size or want the 5 hole wagos, please comment, and I can try to upload them for all to use.  For the cover, I used M4x6x6 heat press inserts with M4x10 bolts.  I printed both parts in PETG with the back of the box on the build plate, and inside of cover on the plate, with no supports.  To hold the wire from coming out, I used zipties that were put on very tight.

Disclaimer:  This is not a UL listed electrical box (obviously).  Use at your own risk.  If used inside your house, and your house burns down, your insurance will not cover anything.  Im not going to even tell you what voltages it would be good for, because again, this is not a listed box.  Get my drift?