Heltec WiFi LoRa 32 V3 Case dual 18650

I was looking for a robust, solid, but not overly large case for a Heltec Wifi LoRa 32 V3 board that would support a decent amount of lithium battery. Taking inspiration from (but not remixed from) https://www.thingiverse.com/thing:6767924 , I designed this case from scratch. It is not a modified version of the thing linked there, but is clearly intended to mimic the design of.

There is a recess on the inside of the top part where a small GPS unit, such as a bn-220, can be placed. It will be secured in place by the bracket on the middle part.

Print the three parts (I like the middle in one colour with the top and bottom in another colour), and two of the button pieces. Assembly is fairly self-explanatory. The top component has a slot to fit the board into, and the middle piece clamps it in place. The bottom part contains a pair of 18650s in parallel which will plug in to the LoRa boards battery port.

You will need to print a pair of the buttons, which need to go into the holes on the top part before installing the board.

https://heltec.org/project/wifi-lora-32-v3/