Frosthaven Summons: Toxin Distributor

Here's a model that I made for the Frosthaven summons, the Toxin Distributor (https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-toxin-distributor-front.png)!  As you can tell, this guy's another mechanical creation with spindly little legs, which means both very little contact area with the printer bed and very little stability as the model builds from those legs.  For that reason, I'd recommend adding support points both near the bottoms of the legs themselves and at intervals along the top sections (where the printer is working out laterally from the foot of the leg).

In the artwork, it's shooting out a syringe from that main port on its front.  Printing out a horizontal syringe seemed like a nightmare to me, so I made a version of it with the syringe separate.  That lets you print the syringe vertically and then glue it in place.  When doing so, just be aware of elephant foot and remove any that you find, otherwise it'll be really difficult to get it in there!

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!