Dutch signalkeeper house and signal box 1:87 H0 scale

Description
This is a Dutch signalkeeper house with the signal box attached to the house.

I have used this model to experiment with the possibilities of my Prusa Mk4 printer. 
This is my first attempt to print the walls of a building in one go, and the chimney on the roof is printed under an angle.

The model is best printed with a 0.25mm nozzle.

I printed the parts in the following batches:
Batch 1 - Walls. 0.25mm nozzle 0.12mm layers
- Signalkeeper house walls.stl

Batch 2 - Roofs. 0.25mm nozzle 0.12mm layers
- Signalkeeper house rooftiles back with chimney.stl
- Signalkeeper house rooftiles front.stl
- Signalkeeper house roof ridge.stl
- 2 * Signalkeeper house roof-edge.stl
- 2 * Signalkeeper house roof-edge signal box.stl
- 2 * Signalkeeper house roof truss 1.stl
- 2 * Signalkeeper house roof truss 2.stl

Batch 3 - Doors and windows. 0.25mm nozzle 0.15mm layers
- 2 * Door high.stl
- 1 * Door low.stl
- 5 * Window high.stl
- 3 * Window low.stl

Happy printing.