Balancing Santa Hat

This small santa hat has a special trick: it balances! 

Printing Instructions (Standard):
I recommend PLA with 0.2mm layer height, 5-10% infill, 2-3 walls, and no supports! Print as oriented. I printed in matte white PLA and colored the red with an acrylic marker.

I designed this to print without brim or supports and test printed this a few times with and without an 8mm brim and both turned out the same. So, use brim if you want, or if the part falls over mid-print, but it is probably unnecessary.

Please comment with any questions or specific requests.

Happy Printing!