Cartographer mount for Enderwire with Dragon Burner

Cartographer mount for Enderwire with Dragon Burner.

The mount can be used with standard edition, but you will have to use the belt clamps with cut as otherwise, the socket won't fit. Thanks to @PiotrChaos, it seems the mount can also be used with the low profile and standard clamps, but this wasn't tested with the actual low profile version, so if you try that, let me know in comments.

You will also have to print that part to attach it to the carriage mount https://github.com/Lzhikai/SIBOOR-E3-SW/blob/main/STLS%20-%20SIBOOR/Hotend/probe_bracket.stl.

This model was inspired by https://github.com/chirpy2605/voron/blob/main/general/Alternative_Voron_Mounts/Modified_Mounts/V1_V2/STLs/Probe_Mounts/Beacon_Probe_Mount.stl, but it was done by me from scratch.