ZWO AM3/AM5/AM5N Hand Controller Holder with Tripod Clamp

This is a simple and functional 3D-printed holder designed specifically for the ZWO AM3, AM5, and AM5N hand controllers. The holder attaches securely to tripod legs with a 4 cm diameter, with a 38 mm inner diameter ensuring a snug and tight fit. It allows easy access to the controller’s joystick and buttons while keeping it neatly in place during astrophotography sessions.

Whether you're organizing your setup or just want a stable mount for your controller, this design ensures convenience and accessibility!

Features:
Custom Fit: Holds the ZWO hand controller snugly, with dimensions tailored to fit controllers. The holder is 50 mm tall, 36 mm wide, and 38 mm thick.
Tripod Clamp: Designed for tripod legs with a 4 cm diameter (38 mm for a snug fit), providing secure attachment while being easy to snap on and remove.
Cable Hole: Includes a slot at the bottom of the holder for neatly routing the coiled cable.
Accessible Design: The open front allows full access to the joystick and buttons without removing the controller.

Print Settings:
Recommended Materials: PETG for flexibility and durability, or PLA+ for a more rigid holder.
Infill: 15–20% Gyroid or Grid for strength. (I used 20% infill for this print)
Walls/Perimeters: 3–4 walls for optimal durability.
Supports: Not required when oriented correctly:
Print the holder upright.
Print the clamp on its side for better strength along the flex axis.