Rugged case for DJI Neo with FPV controller and Motion controller

Since I couldn't find any model for the Neo paired with the FPV controller, I created my own.

I also made a cut out for the cable for the battery pack. This way you can charge without getting the batterypack out. I do recommend leaving the top open.

Print with brim to prevent warping.

It also needs support for the hinge and latch ribs.

The TPU seal could be done in PLA but might need some adjustment.

EXTRA:

You need some M3x30 bolts.

I recommend using hexagon socked head screws, but normal hexagon bolts should work fine.

Oh, and don't be like me, and try to print the letters on the top in PETG. 

It really doesn't stick to PLA ;-).