Christmas ornament. A ball. Wall decoration

Christmas is coming! It is time to decorate your home.
Add a small piece of double-sided tape and effortlessly hang this stunning 2D artwork on your wall.
 

Model parameters:
Length: 85mm
Width: 50.4mm
Height: 0.76mm (3 layers)
Colors: Gold, Silver, Pink-Blue silk PLA.
Weight: only 4.9 gram!
Bottom surface: Archimedean Chords
Top Surface: Monotonic line

Handle PLA Silk with care! 
Silk filament is particularly sensitive to temperature and printing speed. For standard PLA Silk, keep the printing speed at 50mm/s or lower for better adhesion and shiny surface. These settings are preconfigured in the provided 3MF file, but feel free to adjust them based on the manufacturer's recommendations for your specific filament.
For Sunlu/JAYO silk filaments, you may use Generic silk PLA profile as a basis and adjust nozzle temperature to 220C and bed temperature to 25C and set printing speed 50mm/s for all types of lines.

Happy printing!

P.S. If you are looking for the solution to reduce 3D printer noise, have a look on soundproof cabinet design, crafted from IKEA furniture. This cabinet reduces printer noise and ensures impressive 36.5 dB(A) at just 1 meter away. Detailed instruction how to build it you may find here