JetKVM 1W sled for Modular 1U Rack

I did some quick modelling while waiting for the JetKVM Kickstarter campaign to end. Using their provided JetKVM 3D Model, I designed this 1W little sled that will hopefully fit the real thing. It is compatible with MartinRowan's ZimaBoard Modular 1U Rack.

There are two versions: 
1. AIO sled
To attach the JetKVM slide it into the sled from the after removing the factory screws, as this version requires 2x M2x10mm screws in place of the original 2x M2x5mm ones.

2. Two-part sled : Same as the first version but requires additional 2x M3 threaded inserts for the top part and 2x  M3x6mm screws for the bottom.

For optimal strength and rigidity, I recommend printing the sled on its 25 degrees angled back oriented downward on the print bed. This orientation aligns the layer lines along the longest structural spans, reducing potential weak points and increasing overall durability.

Print Settings

Rafts:

Doesn't Matter

Supports: 

Yes

**Resolution:**

0.2

Infill: 

30

**Filament Material:**

PETG

Category: Computer

1W sled for the upcoming JetKVM