I printed one that I splitted in 6 pieces to fit in MK4S plate.
I will post a remix if anyone is interested. (edited)
Side Panels - Prusa CORE One
STEP files of the side panels assembly for easy creation of addons and accessories (typically using magnets)
320
455
2
18 k
updated November 27, 2024
Makes
Comments
This is cool. Are the panels swappable so the spool can be on the left side?
@Tomek need to know this aswell
@Tomek Yes, on the promotion video, they showed that it is possible to mount the filament on both sites.
EDIT: My question would be if I can mount 2kg spools? (edited)
I can't wait for people to make cool attachments and mods. These two side panels seem perfect for tinkering and attaching stuff.
Printed on the XL in two parts to make Test fitments. I did cut 1cm Off on the top Sides to make it fit. Cool stuff is planned 😉
HSW Inlay
https://www.printables.com/model/1090971-hsw-core-one-inlay (edited)
Just a opinion to prusa CORE one:
Why you didnt make a sealed door or removable cover to the side where the filament roll is located? This would prevent temp. changes, protects from dirt, dust, environment humidity, etc.. maybe already with an implemented box or model to print as desiccant box. Im sure the community will do that, but why not give it already with the printer?
View 4 more comments
@WSDesEng Actually it is smart - it does serve a purpose, as they explained in their release notes. It reduces the volume of the inner chamber (or as you defined it, a box) therefore significantly decreasing the time it takes to heat the chamber, while at the same time not wasting that space. So yeah, smart... (edited)
@WSDesEng because its not a heated chamber, its an enclosure with ventilation and filtration so its not supposed to be sealed in any way.
Are these intended to be printed on an XL? They're just a little oversized to fit on the bed.
They will need to be cut and then fastened together.
Am I missing something here?
@BillErskine_118491 I don’t think this is something to be printed, but rather to share the dimensions with the community so that everyone can start creating various accessories, supports, and storage solutions for the printer.
@CyrilE_765586 It fits on the XL, I did print it, but the top cover part is ever so slightly to big, so I did cut it A bit. I want to do Test fitments in this.
Tohle už se nevejde ani na Prusa XL. Jen ze zvědavosti na čem se to tiskne?
@martinkotrba_647733 Dobrý den. Nejde o to tisknout celé bočnice. Ty budou z kovu. Jde o STEP soubory pro lepší tvorbu addonů které budou pasovat do bočnic.
@JanKratochvi_1903648 Dobrý den, děkuji za odpověď.
Great, but what about all the other parts of the printer that are not open source?
@Software2 Prusa is open as possible, but it is not the best idea to open everything before shipping first printers. More about open source at Prusa here: https://www.prusa3d.com/page/open-source-at-prusa-research_236812/