Filament Type Sign

These signs fits to a 20mm shelf with rounded edge. But adaptors for 10, 12, 14, 15, 16 and 18mm square shelf has been added.

The signs can be used to identify where a filament type is located on the shelf.

Currently available signs:

PLA, PETG, PET, ASA, TPU, ABS, PC, CF, Nylon and more to come.

Instructions:

Each sign has two parts, e.g. PLA sign and PLA Text. Import them both to the slicer and select the wanted colours for text and sign. Text side of both the text and sign shall be faced down on the build plate.

Layer height: 0.2mm (including first layer)
Nozzle: 0.4mm
Material suggestion: PLA, PETG, ABS, PET

If your shelf is smaller than 20 mm, please include an adaptor like this Sq15mmAdaptor before slicing. See picture:

Printer: 

Any single hotend printer with or without colour control (AMS) can be used. (Only 3 manual filament changes is required)
 

Slicer: 

I have used Orca slicer on my old bedslinger with a primetower added. But any slicer should be able to do the job. (See picture)