Zahnrad mit 38 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G.
Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert.
Hebelstellungen und Gewindesteigungen sind aus der Tabelle ersichtlich.
Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.
Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig
Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch an den anderen genannten Drehmaschinen paßt.
……………………..
Gear with 38 teeth for driving the feed gear on the Bernardo P600G lathe.
The gear is mounted in place of the original gear with 32 or 64 teeth.
Lever positions and thread pitches can be seen in the table.
Should also fit on identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600.
Printed with Prusa MK4
PLA
3 to 4 perimeters
50% infill
Seam position: random
If someone prints it and uses it, please let me know if it also fits on the other lathes mentioned.
The author marked this model as their own original creation.