Ryobi FVM51 Rotary Tool Wall Holder

Wall holder for a Ryobi FVM51 rotary tool. Attaches with a medium Command Strip.
1
9
0
71
updated November 25, 2024

Description

PDF

Update: 

Of course almost immediately after I uploaded this it turns out there were already hangers available for this model rotary tool under the non US part number. 

So for reference, the US version of this tool is FVM51 but it looks like the UK part number is RRT4. As far as I can tell they're the exact same item. There's another file on this site uploaded by person with the display name of “chris” and that version also includes a slot for the adjustment wrench, which is a nice feature. I borrowed that idea and uploaded a variation of this model with a similar wrench slot.

Original Post:

I couldn't find a hanger for a Ryobi FVM51 rotary tool so I made this one. It secures to the wall with a single medium size Command Strip. 

It's a secure but loose enough fit that the tool can spin around inside the holder and can't fall out through the front. This rotary tool handle body cross section is more of an ellipse than a circle so if I had followed the tool profile it would only fit into the holder with the front side of the tool facing forward or backward. 

The walls are thick enough that the holder shouldn't flex and the front slot should fit the tool without having to remove standard tool bits and attachments. 

I printed this in PETG with a 0.4mm tip and 2 walls and 15% infill at 0.3mm layer height. No supports needed.

Tags



Model origin

The author marked this model as their own original creation.

License