6QT Shelving Bin Sleeves

These sleeves attach to shelf brackets so you can add 6qt bins for storage.  Here is a list of what you might need:

• Shelf Standards.  These hold the shelf brackets, the design is made for the double-row ones.  The ClosetMaid, Project Source (Lowes) or Knape and Vogt should all be interchangeable.
• 7" Shelf Bracket.  The sleeves fit into 7" shelf brackets.  They might vary slightly in length, but are sold as 7".  Knape and Vogt and Project Source (Lowes) should both work.
• 6qt Sterlite Bins. One bin for each pair of sleeves.  These can also be found at Home Depot for ~$2 each.
• M3 Screws.  These screw in from the underside to hold the sleeve to the shelf bracket.  They don't need to be very long, the kit listed here is nice for different applications and I use this kit for most of my 3d models.

This was part of a larger organizational project: