Not a big shelf to hang on the faucet. There are two versions of the faucet mount. Remember that this type is made for a round faucet.
The adapters created are for a faucet with a radius of 25mm. If you have a faucet with a different radius, you should make appropriate adapters.
If you use handler_v1, you should print two different adapters:
- universal_adapter x1
- adapter_for_handler _v1 x1
Whereas if you use adapter_v2, you should print:
- handler_nuts x1
- universal adapter x2
NOTE: Remember that when creating a new adapter for a faucet with a smaller diameter, the adapter should be thicker so that the main screw can screw in and press everything well.
The author marked this model as their own original creation.