Kingroon KP3s Pro S1 / V2- Hula mount

This piece is made to used with the HULA design. I only designed the center part
5
11
0
229
updated November 24, 2024

Description

PDF

Kingroon KP3s Pro- Hula mount

 

This piece is made to used with the HULA design. I only designed the center part, the other parts of Hula you can download in the next link:

 

Original HULA design:

 

https://makerworld.com/en/models/417509#profileId-502157

 

Installation Guide:

 

1 . Remove electronic cover of your kingroon

2. Use the template to make a drills in the cover (drill diameter 3 or 3.2mm)

 

Note: You have two template, 1 for the back and another one for the front. It's important to make the drill in the back according to red marks in the image

 

 

3. Screw your HULA feets in the electronic cover, you need 8 units of M3x8 screws

 

4. Assembly the electronic cover in your KP3s Pro

 

Note: You cant used the two screws from z-axle but I the design this piece to make the axis remains very stable making maintenance easier.

Tags



Model origin

The author marked this model as their own original creation.

License