This is a wall mount for a Lego brick Buck Rogers Starfighter / Thunder fighter Ship created according to the MOC 48610 design on Rebrickable created by CBSNAKE.
This is similar to my Colonial Viper mount, there are two parts to this design the first is the sled that the ship sits on. The second a complete wall mount. I display this flying “up” the wall, which is why my complete mount is like that.
The screw hole is 2mm, but depending on what you ahve to hand you may want to make it bigger for your use.
The Sled was created as a quick test print to check dimensions, however like the Viper mount I realised that people may want to use a different display angle or orientation, so the base sled is supplied as a starter to help you build your own mount.
As shown the photo the sled has the back part of the ship resting in a frame, I have some white blue-tak in there too to help if stay on place as its mounted next to a door and may get slight knocks or vibration s over time if the door is slammed..
Link to model (This is NOT my design!)
https://rebrickable.com/mocs/MOC-48610/CBSNAKE/space-buck-rogers-starfighter-ship
The author marked this model as their own original creation.