A small container to hold small things like SD cards so you don't lose them.
5
7
1
71
updated November 24, 2024

Description

PDF

A small container to hold small things like SD cards so you don't lose them.

Supports are recommended for the 90° ledge at the end of the threads on each part. Depending on how well you can print overhangs, you might need to place supports on the top of the roof inside each part. I printed these with 0.12mm layer height, but 0.2 will probably also work.

 

Capsule Top v2 adds a small ledge at the start of the threads to make the parts easier to screw together. You might need supports for it.

Tags



Model origin

The author marked this model as their own original creation.

License